>

Setup Static IP on the Cisco DDR2200

1. Abre un navegador web y ve a http://192.168.1.254.

  • Username: user
  • Password: user

2. Select "Home Network". Select "WAN Setup".

3. Select the "Edit" button at the top of the list.

4. Make sure the settings are as follows:

  • Broadband Type : DSL
  • DSL mode : ATM
  • Broadband Connect Type : MAC Encapsulated Routing
  • Encapsulation Mode: LLC/SNAP-BRIDGING
  • VPI 8 VCI 35 | Madison River: VPI 0 VCI 35
  • Service Category: UBR Without PCR
  • Use The Following IP Address : Selected
  • WAN IP Address : Assigned Static IP
  • WAN Subnet Mask : Assigned Subnet Mask
  • Use The Following Default Gateway : Selected
  • Use IP Address : Assigned Default Gateway
  • Use The Following DNS Server Addresses: Selected
  • Primary DNS Server : Regional Primary DNS
  • Secondary DNS Server : Regional Secondary DNS

Select the "Save".

Principales Herramientas
Prueba de Velocidad de Internet
Solucionador de Problemas
¿Dónde Está Mi Técnico?
Compatibilidad del Módem
Administrar Mis Servicios
Encontrar Disponibilidad de Productos