How to configure LAN subnets on your modem

Your broadband router can support multiple LAN subnet settings. Please visit the DHCP settings page to see how to configure the default IPv4 subnet.

Note: Your modem settings may appear slightly different from the images below, but the steps will be the same.

1. Connect a device to your network over WiFi or using an Ethernet cable connected to your modem. This works best on a tablet or computer.

2. Open a web browser and type http://192.168.0.1 into the web address field.

3. Sign in to the modem settings (GUI) using your Admin Username and Admin Password, printed on the sticker.

Find the Admin Username & Password on the modem sticker

4. Select Advanced Setup in the main menu.

5. Select LAN Subnets in the left sidebar.

6. Follow the steps to edit the LAN Subnets settings.

Step 1: Enter the LAN Subnet Name.
Step 2: Set the interface(s) associated with the subnet (Ethernet; SSID; LAN/WAN).
Step 3: Enable/Disable the IPv4 Addressing State.
Step 4: Set the IPv6 LAN Connection Type. You can also edit or remove items from the Subnet List at the bottom.
Step 5: When you're finished adding or removing items, click "Apply" to save your changes.